RESEARCH ON THE APPLICATION OF TURNAROUND FRACTURING TECHNOLOGY IN INJECTION-PRODUCTION CORRESPONDING WELLS
-
摘要: 曙光油田低渗油藏存在老井低产与注压高注不进的双重难题，需要实施重复压裂提高产能。但常规重复压裂存在改造效果差和快速水窜风险，因而选择在注采对应井开展转向压裂矿场实验研究。通过注采对应井转向压裂方案研究、转向剂筛选及现场实施，取得了良好的增产增注效果。此次实验研究中，注采井均实施转向压裂，拓宽了转向压裂的思路，扩大了转向压裂的应用范围，进一步验证了转向压裂对老井挖潜增产、提高低渗油气田采收率具有重要的意义。Abstract: In order to solve the difficulty of the low permeability reservoir's low production of old wells and poor flood effectiveness in Shuguang mine area of Liaohe Oilfield, an injection-production corresponding wells of turnaround fracturing technology research is carried out. Through turnaround Mechanism, fracturing project of injection-production corresponding wells research, diverting agent selection and field conduct, it gets good effect on increasing production and injection. During this application research, turnaround fracturing technology is used for injection and production wells and widening the range of the turnaround fracturing, makes further proving turnaround fracturing has important significance to tap production and energization, and to improve the recovery of the low permeability reservoir.
-
图 1 转向压裂地层机理示意图
Figure 1. Sketch map of mechanism on the formation of deflection fracturing
图 5 测量转向剂突破压力试验装置
Figure 5. Leakage test-device for measurement of breakthrough pressure of diverting agent
表 1 align="right"H-3转向剂封堵率
Table 1. Plugging ratio of Diverting Agent LH-3
-
[1] 白延峰, 王美强, 刘春杰, 等.转向压裂技术在老油田后期开发中的研究与应用[J].石油化工应用, 2011, 30(11):4~6. doi: 10.3969/j.issn.1673-5285.2011.11.003BAI Yan-feng, WANG Mei-qiang, LIU Chun-jie, et al. Study and application of divert fracturing technology in later-stage development of old oil field[J]. Petrochemical Industry Application, 2011, 30(11):4~6. doi: 10.3969/j.issn.1673-5285.2011.11.003 [2] 曹继虎, 杜向前, 李冰岩, 等.低渗透油田堵水转向压裂新技术研究与应用[J].石油化工应用, 2010, 29(1):49~53. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH201001019.htmCAO Ji-hu, DU Xiang-qian, LI Bing-yan, et al. Study and application of new technology of deflection fracturing by water shut-off in low-permeability oilfield[J]. Petrochemical Industry Application, 2010, 29(1):49~53. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH201001019.htm [3] 孙峰, 李行船, 熊廷松, 等.低渗透油藏水力压裂井应力场转向定量评价[J].断块油气田, 2012, 19(4):489~492. http://www.cnki.com.cn/Article/CJFDTOTAL-DKYT201204023.htmSUN Feng, LI Xing-chuan, XIONG Ting-song, et al. Quantitative evaluation on stress redistribution for hydraulic fracturing well of low-permeability reservoir[J]. Fault-Block Oil and Gas Field, 2012, 19(4):489~492. http://www.cnki.com.cn/Article/CJFDTOTAL-DKYT201204023.htm [4] 范振忠, 刘振华, 高立峰.低渗透裂缝性油藏封堵裂缝后转向压裂工艺[J].科学技术与工程, 2009, 9(1):113~115. http://www.cnki.com.cn/Article/CJFDTOTAL-KXJS200901026.htmFAN Zhen-zhong, LIU Zhen-hua, GAO Li-feng. Technology of plugging fracture and fracturing technology in fractured low permeability oil reservoir[J]. Science Technology and Engineering, 2009, 9(1):113~115. http://www.cnki.com.cn/Article/CJFDTOTAL-KXJS200901026.htm [5] 王军峰, 马立军, 李传浩, 等.缝内转向压裂技术在靖安油田的应用[J].石油化工应用, 2007, 26(5):30~34. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH200705013.htmWANG Jun-feng, MA Li-jun, LI Chuan-hao, et al. The application of in-fissure divert fracturing technology in Jing'an oil field[J]. Petrochemical Industry Application, 2007, 26(5):30~34. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH200705013.htm [6] 张应科, 钟水清, 吴月先, 等.加砂压裂转向配套技术描述模式及应用[J].钻采工艺, 2011, 34(5):56~57, 72. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY201105019.htmZHANG Ying-ke, ZHONG Shui-qing, WU Yue-xian, et al. Description model of sand fracturing turning supporting technology and its application[J]. Drilling & Production Technology, 2011, 34(5):56~57, 72. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY201105019.htm [7] 白红艳, 杨勇, 苏春娥.低渗透油田缝内转向压裂工艺适应性研究[J].石油化工应用, 2010, 29(2):56~60. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH2010Z1018.htmBAI Hong-yan, YANG Yong, SU Chun-e. Adaptability research of fracture shift technology in low-permeability oil field[J]. Petrochemical Industry Application, 2010, 29(2):56~60. http://www.cnki.com.cn/Article/CJFDTOTAL-NXSH2010Z1018.htm [8] 吴勇, 陈凤, 承宁.利用人工暂堵剂转向提高重复压裂效果[J].钻采工艺, 2008, 31(4):59~61. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY200804020.htmWU Yong, CHEN Feng, CHENG Ning. Enhancing re-fracturing effect with artificial temporary plugging technology[J]. Drilling & Production Technology, 2008, 31(4):59~61. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY200804020.htm [9] 王凤江, 丁云宏, 路勇.低渗透油田重复压裂技术研究[J].石油勘探与开发, 1999, 26(1):71~73. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY200903022.htmWANG Feng-jiang, DING Yun-hong, LU Yong. Study on refracturing technology in low permeability oil reservoir[J]. Petroleum Exploration and Development, 1999, 26(1):71~73. http://www.cnki.com.cn/Article/CJFDTOTAL-ZCGY200903022.htm -
下载:
图(5) / 表(1)
计量
- 文章访问数: 139
- HTML全文浏览量: 74
- PDF下载量: 22
- 被引次数: 0
