BAIDUNZI-XIAOXUGONG DUCTILE SHEAR ZONE AND ITS ORE-CONTROLLING EFFECT IN THE SOUTHERN BEISHAN AREA, GANSU
-
摘要: 白墩子—小西弓韧性剪切带是甘肃北山地区8条韧性剪切带中最南侧的一条, 位于北山南带的白墩子—小西弓一带, 呈近东西向展布, 长160km, 宽5~8km。该韧性剪切带以近水平右行剪切为特点, 是一条形成于中低—中偏高温度、较低差应力条件(53~106MPa)下的韧性剪切带, 主应变(Rxz)为4~20, 剪应变(γ)1.41~2.42, 剪位移达10~25km。该韧性剪切带对金矿床控制作用明显, 在区域上控制金矿床(点)的分布, 在矿床范围内控制金矿化带、矿体的形态、产状和规模。压扭性韧性剪切变形特点决定了金矿化类型以蚀变糜棱岩型为主, 蚀变以交代作用为特色。金矿化稍晚于韧性变形。Abstract: The Baidunzi-Xiaoxigong ductile shear zone, as the southernmost one of the eight ductile shear zones in the Beishan area, Gansu, is situated at the southern border of the southern Beishan area and near the northern border of the Dunhuang massif.It extents in a nearly E-W direction with a length of 160 km and a width of 5-8 km.This shear zone is characterized by subhorizontal dextral shear and formed under the conditions of low-middle to middle-slightly high temperatures and relatively low differential structural stresses (53-106 MPa).The principal strain (Rxz)is 4-20, the shear strain (γ)is 1.41-2.42 and the shear displacement is up to 10-25 km.The ductile shear zone has a marked controlling effect on gold deposits:it controls the distribution of gold deposits (occurrences)on a regional scale and the shape, attitude and size of gold mineralization zones and orebodies on a deposit scale.The features of transpressional ductile deformation determine that gold mineralization is mainly of altered mylonite type and that alteration is featured by metasomatism.Gold mineralization occurred a little later than ductile shear deformation.
-
Key words:
- ductile shear zone /
- deformation /
- ore-controlling effect /
- Baidunzi-Xiaoxigong area /
- Gansu province
-
图 2 白墩子-小西弓韧性剪切带面理线理产状投影图
下半球投影, A.面理极点投影; B.线理投影
Figure 2. Projections of foliations and lineations of the Baiduzi-Xiaoxigong ductile shear zone (hemispheric projections from bottom to top)
图 3 白墩子之东韧性剪切带中含金石英脉分布与糜棱岩面理的关系
1.花岗质糜棱岩; 2.含金石英脉; 3.产状; 4.地质点及编号
Figure 3. Relation between Au-bearing quartz veins and mylonite schistosity
表 1 白墩子-小西弓韧性剪切带糜棱岩岩石有限应变测量结果
Table 1. Finite strain measurements of mylonites in the Baidunzi-Xiaoxigong ductile shear zone
表 2 由定向薄片显微构造S-C面理夹角测算的剪应变
Table 2. Shear strains calculated from angles between S-C foliations of oriented thin sections of mylonite
表 3 显微构造反映的构造运动方向
Table 3. Sense of movement of the ductile shear zone
表 4 糜棱岩构造差应力估算结果
Table 4. Differential stress estimates of mylonites
-
[1] Ramsay J G.Shear zone geometry:A review[J].Journal of Structural Geology, 1980, 2:83~99. doi: 10.1016/0191-8141(80)90038-3 [2] Twiss R J.Theory and application of a recrystallized grain-size papeopiezometer[J].Pure Appl.Geophys.1977, 115:227~244. doi: 10.1007/BF01637105 [3] Lister G S, Snoke A W.S-C mylonites.Journal of Structural Geology, 1984, 6:617~638. doi: 10.1016/0191-8141(84)90001-4 [4] Ramsay J G, Huber M J. The Technique of Modern Structural Geology (2): Folds and Fractures. Academic Press, Inc. (London) ltd. 1987. [5] Brodie K H.Variations in mineral chemistry across a shear zones in phlogopite peridotite[J].Journal of Structural Geology, 1980, 2(1 2):265~272. http://www.sciencedirect.com/science/article/pii/0191814180900590 [6] 王小风, 王岩国, 康振川, 等. 构造动力作用下矿物的形变与相变[C]. 地质力学文集(9). 北京: 地质出版社, 1989: 187~201. [7] 陈柏林, 董法先, 李中坚.韧性剪切带型金矿床成矿模式[J].地质论评, 1999, 45(2):186~192. doi: 10.3321/j.issn:0371-5736.1999.02.012 [8] 陈柏林, 董法先.江西大背坞地区韧性剪切带中岩石变形与矿物变化的关系[J].矿物岩石, 1999, 19(1):29~32. http://www.cnki.com.cn/Article/CJFDTotal-KWYS901.005.htm [9] Mitra G, Boyer S E.Energy balance and deformation mechanisms of duplexes.Journal of Structural Geology, 1986, 8(3 4):291~304. http://www.sciencedirect.com/science/article/pii/0191814186900507 [10] 岳石, 马瑞.实验岩石变形与构造成岩成矿[M].吉林:吉林大学出版社, 1990. [11] 周济元, 崔炳芳, 陆彦.广西金牙金矿床构造动力成矿作高温高压实验及其研究意义[J].矿物岩石, 1991, 11(3):88~98. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=KWYS199103012&dbname=CJFD&dbcode=CJFQ [12] 周济元, 崔炳芳, 陆彦. 论构造动力成矿作用[M]. 地质力学文集(10). 北京: 地质出版社, 1995: 69~75. [13] Dong Faxian, Li Zhongjian, Chen Bailin et al.A study of high-temperature and high-pressure experiment of correlativity between deformation system of Au-bearing rocks and element adjustment[J].Acta Geologica Sinica (English Edition)1999, 73(1):40~46. doi: 10.1111/acgs.1999.73.issue-1 [14] Boyle R W. The geo-chemistry of gold and its deposits[M]. Geological Survey of Canada. Bulletin 280, 1979. [15] Bonnemaison M, Marcoux E.Auriferous mineralization in some shear zone:A three-stage model of metallogenesis[J].Mineral Deposits, 1990, 25(2):96~104. doi: 10.1007/BF00208851 [16] Roberts R G. 1987. Ore deposit model#11: Archean lode gold deposits. Geoscience Canada, 14(1): 37~52. [17] Sibson R H, Robert F, Poulsen K H.High-angle reverse faults, fluids pressure cycling and meso-thermal gold deposits[J].Geology, 1988, 16:551~555. doi: 10.1130/0091-7613(1988)016<0551:HARFFP>2.3.CO;2 [18] Boullier A M, Robert F.Palaeoseismic events recorded in Archean gold-quartz vein networks[J].Journal of Structural Geology, 1992, 14:161~179. doi: 10.1016/0191-8141(92)90054-Z [19] 甘肃省地质矿产局.甘肃省区域地质志[M].北京:地质出版社, 1989. [20] 左国朝, 何国琦.北山板块构造及成矿规律[M].北京:地质出版社, 1990. [21] 左国朝, 冯永忠, 刘春燕, 等.甘肃北山中南带新发现燕山早期走滑挤压推覆构造带[J].地质科学, 1992, 27(4):309~316. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=DZKX199204000&dbname=CJFD&dbcode=CJFQ [22] 左国朝.甘肃北山中南带新发现燕山早期走滑挤压推覆构造带[J].地质科学, 1992, 27(4):309~316. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=DZKX199204000&dbname=CJFD&dbcode=CJFQ [23] 左国朝, 李茂松.甘蒙北山地区早古生代岩石圈形成与演化[M].兰州:甘肃科学技术出版社, 1996. [24] 左国朝, 郑亚东.1990年北山岩石圈研究野外调研取得重大突破, 发现八条区域性韧性剪切带及特大型推覆构造[J].甘肃地质科技情报, 1991, (1):1~4. http://www.cnki.com.cn/Article/CJFDTotal-CDLG199103017.htm [25] 陈柏林, 杨农, 吴淦国, 等.甘肃北山南带韧性剪切带型金矿床构造控矿解析[J].矿床地质, 2002, 21(2):149~158. doi: 10.3969/j.issn.0258-7106.2002.02.007 [26] 陈柏林, 吴淦国, 刘晓春, 等.北山地区发现韧性剪切带型金矿床[J].中国区域地质, 2000, 19(3):336. doi: 10.3969/j.issn.1671-2552.2000.03.020 -
下载:
计量
- 文章访问数: 237
- HTML全文浏览量: 114
- PDF下载量: 25
- 被引次数: 0
