Turn off MathJax
Article Contents
ZHAO Kai, HU Hongjin, jianyong xu, et al., 2026. Quantitative Evaluation of Hydrocarbon Migration Capacity of Oil-Source Faults and Its Controlling Effects on Hydrocarbon Accumulation. Journal of Geomechanics. DOI: 10.12090/j.issn.1006-6616.2025087
Citation: ZHAO Kai, HU Hongjin, jianyong xu, et al., 2026. Quantitative Evaluation of Hydrocarbon Migration Capacity of Oil-Source Faults and Its Controlling Effects on Hydrocarbon Accumulation. Journal of Geomechanics. DOI: 10.12090/j.issn.1006-6616.2025087

Quantitative Evaluation of Hydrocarbon Migration Capacity of Oil-Source Faults and Its Controlling Effects on Hydrocarbon Accumulation

doi: 10.12090/j.issn.1006-6616.2025087
Funds:  the National Science and Technology Major Project of the Ministry of Science and Technology of China(2025ZD1402801-07)
More Information
  • Received: 2025-07-18
  • Revised: 2026-02-04
  • Accepted: 2026-02-09
  • Available Online: 2026-11-18
  • [Objective] Clarifying the controlling effect of oil-source fault transport capacity on shallow oil and gas accumulation in fault-depression basins can provide quantifiable theoretical basis and technical support for the optimization of favorable shallow oil and gas zones. [Methods] The study first clarifies the role and influencing factors of faults in vertical oil and gas migration through the analysis of fault transport mechanism, then verifies the effect of key parameters combined with physical simulation experiments, and further integrates multiple parameters to establish a quantitative evaluation model of fault transport capacity. Through the functional relationship Q=f(sinθ, cosα, L, E), the quantitative coupling analysis of fault dip angle (θ), angle between strike and principal compressive stress (α), extension length (L) and hydrocarbon expulsion intensity (E) is realized. [Results] The study shows that the oil and gas transport capacity of faults is mainly controlled by fault static characteristics, fault activity characteristics and hydrocarbon supply capacity of source rocks, and has a linear functional relationship with factors such as fault extension length, cosine value of the angle between fault strike and regional principal compressive stress, sine value of fault dip angle, hydrocarbon expulsion intensity of source rocks, fault activity rate during the main hydrocarbon accumulation period and fault activity time during the main hydrocarbon accumulation period. [Conclusion] In the application practice of Zhanhua Sag, the fault transport capacity is divided into three grades: Grade A (Q>10), Grade B (1≤Q≤10) and Grade C (Q<1). Empirical results show that the oil and gas enrichment degree and the consistency with the Neogene oil and gas enrichment zones in the areas controlled by Grade A-B faults are significantly higher than those in the areas controlled by Grade C faults. [Significance] This study deepens the understanding of fault-controlled reservoir formation laws in fault-depression basins and provides a scientific basis for the selection of favorable shallow oil and gas zones.
     

     

  • Full-text Translaiton by iFLYTEK

    The full translation of the current issue may be delayed. If you encounter a 404 page, please try again later.
  • loading
  • 加载中

Catalog

    Article Metrics

    Article views (11) PDF downloads(4) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return