###
DOI:
地质力学学报:2009,15(2):201-208
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
三维地质建模技术方法研究——以东昆仑造山带为例
(1.中国地质大学地球科学与资源学院,北京 100083;2.中国地质科学院地质力学研究所,北京 100081)
STUDY ON THE TECHNOLOGY AND METHOD OF 3D GEOLOGICAL MODELING: A CASE STUDY OF THE EAST KUNLUN OROGENIC BELT
(1.School of Earth Sciences and Resources,China University of Geosciences,Beijing 100083,China;2.Institute of Geomechanics,Chinese Academy of Geological Sciences,Beijing 100081,China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1845次   下载 2570
投稿时间:2009-05-25    
中文摘要: 三维地质建模的关键技术,是如何利用专业地理信息系统(GIS)的立体空间平台将三维空间地质实体真实地再现,实现地质体的三维可视化和相关空间分析,为地质研究和矿产资源勘查提供技术支撑。本文以东昆仑造山带为研究对象,利用Micromine软件系统对地质体三维实体建模中的关键技术和建模方法进行了探索性研究,初步总结出三维地质建模的主要技术和方法流程。
Abstract:The key technology of 3D geological modeling is how to make use of professional GIS platform, which can truly get the reappearance of 3D geological entities and spatial analysis, to provide technical support of geological research and exploration of mineral resources. In this paper, taking the east Kunlun orogenic belt as object and using Micromine software system, the authors have studied and summarized the key technology and methods of 3D geological modeling.
文章编号:     中图分类号:    文献标志码:
基金项目:中国地质调查局项目(编号:1212010711510)资助。
引用文本:
张思科,倪晋宇,高万里,等,2009.三维地质建模技术方法研究——以东昆仑造山带为例[J].地质力学学报,15(2):201-208.DOI:
ZHANG Si-ke,NI Jin-yu,GAO Wan-li,et al,2009.STUDY ON THE TECHNOLOGY AND METHOD OF 3D GEOLOGICAL MODELING: A CASE STUDY OF THE EAST KUNLUN OROGENIC BELT[J].Journal of Geomechanics,15(2):201-208.DOI:

用微信扫一扫

用微信扫一扫